PS Program Placement Setup

Update Claimable Time for Program Placements

Process Overview

Only Placement Administrators have access to enter, update, or correct Program Placement information.  If you are not a Placement Administrator, send an email request to your Placement Administrator.

If Claimable Time details for a Program’s Placements needs to be updated due to a recent or future change, insert a new effective dated row to update the Claimable Time details for the Program Placements.

Note:    Updates to the Program Placement configuration will occur on the entered Effective Date.  If the Effective Date is a future date, updates to the Program Placement configuration will not apply in Medici until that date (ie. any Claimable Time Details added will not apply to Program Placements prior to the Effective Date, and any Claimable Time Details that are deleted will not be deleted from the Program Placement configuration until the entered Effective Date).

If the Claimable Time details need to be corrected rather than updated (ie. incorrect Claimable Time details were entered when the Program Placement information was configured), the Claimable Time details should be updated in ‘Correction’ mode.

Step by Step Instructions

Note:    The following instructions assume Placement information has previously been configured for the selected Program, and the Claimable Time Details for the Program need to be entered or updated.  If Placement information for the Program has not been configured, please refer to the process instructions on the ‘Creating Program Placement Configuration’ process page.

Step 1:            Receive request to update Placement information for a Program

Step 2:            Locate the Program, and record the Effective Date

Question 1:     Does Claimable Time need to be added for the Program Placements?

Step 3:            Record the Claimable Time for the Program Placements

Question 2:     Does Claimable Time need to be deleted from the Program Placements?

Step 4:            Delete the Claimable Time details from the Program Placements

Step 5:            Save the updates to the Program Placement information

Step 6:            Send notification that the Program Placement information has been configured

Step 1:    Receive request to update Placement information for a Program

Action

Details

Requests to update Placement information for a Program will be received via email from an authorised person (eg. Program Director, Head of School, etc).

The following information is required:

- Program Code

- Date from which the updates to the Placement information will apply to Placements for the selected Program (effective date)

- Claimable number of days or hours, and the Contact Type

 

Step 2:    Locate the Program, and record the Effective Date

Application:   Medici

Navigation:    Student Placements®Placement Setup®Program Placement Setup

update1

A Academic Institution:    Type or select UniSA (if this value is not already displayed).

       Academic Program:       Type or select the [relevant Program Code].

B Select the Search button (or press Enter).

Result:  The Program Placements page is displayed.

update2

Program Placement Details

A In the Program Placement Details section, select the Add a New Row button (+).

B Effective Date:               Type or select the [date from which the updated Claimable Time information will apply to Placements for the selected Program].

 

Question 1: Does Claimable Time need to be added to the Program Placements?

Question

Yes

No

Does Claimable Time need to be added to the Program Placements?

Go to step 3.

Go to question 2.

Explanation:

If Claimable Time needs to be added to the Program Placements, the additional Claimable Time information must be recorded (step 3).

If Claimable Time does not need to be added to the Program Placements, the next step is to determine if existing Claimable Time details need to be deleted (question 2).

 

Step 3:    Record the Claimable Time details for the Program Placements

Application:   Medici

Navigation:    The Program Placements page will already be displayed as a result of performing step 2

update3

Claimable Time

Warning:  Claimable Time must be entered in the same format used to record the Required Contact Time (ie. if contact time is recorded in ‘days’ not ‘hours’, then claimable time must also be recorded in ‘days’ and not ‘hours’).

Warning:  The total Claimable Time for a given Contact Type cannot exceed the Required Contact Time (eg. if the contact time is 25 days, a Site Mentor could claim up to 25 days and a Site Coordinator could also claim up to 25 days, however two Site Mentors can not claim more than a total of 25 days between them).

If there is an existing row of Claimable Time:

A In the Claimable Time section, select the Add a New Row button (+).  There is no need to insert a new row if there are no existing Claimable Time details.

B Populate the new row in the Claimable Time section as follows:

Contact Type:             Select the [Contact Type that may claim time for supervising a student on Placement for the selected Program].

Claimable Number:  Type the [number of hours or days that may be claimed by the Contact].

Time Period:            Select the [same value as the Time Period field in the Required Placement Contact Hours/Days section].

Note:  If the Contact Type does not yet exist in Medici, email your Placement Administrator to request the Contact Type value be created (if you are a Placement Administrator, create the Contact Type value).  Once the Contact Type value has been created, follow these instructions to record the Claimable Time details for the Program Placements.

Continue to repeat this step until all Claimable Time details have been recorded for all required Contact Types.

 

Question 2:   Does Claimable Time need to be deleted from the Program Placements?

Question

Yes

No

Does Claimable Time need to be deleted from the Program Placements?

Go to step 4.

Go to step 5.

Explanation:

If Claimable Time needs to be deleted from the Program Placements, delete the Claimable Time information that is no longer applicable (step 4).

If Claimable Time does not need to be deleted from the Program Placements, the next step is to perform any other required changes to the Program Placement information for the same effective date, and then save the record (step 5).

 

Step 4:    Delete the Claimable Time details from the Program Placements

Application:  Medici

Navigation:   The Program Placements page will already be displayed as a result of performing step 2

update3

Claimable Time

A If there is more than one Claimable Time record, select the View All link to display all Claimable Time records.

B In the Claimable Time section, select the Delete Row button (-) adjacent to the Claimable Time record to be deleted.

Result:  A message is displayed requesting confirmation the selected row is to be deleted, and advises the deletion will occur when the transaction is saved.

update5

A Select the OK button (or press Enter).

Result:  The selected row of Claimable Time detail is deleted.

Continue to repeat this step until all Claimable Time detail that is no longer required has been deleted.

 

Step 5:    Save the updates to the Program Placement information

Application:  Medici

Navigation:   The Program Placements page will already be displayed as a result of performing step 3 or step 4

update6

If further Program Placement details need to be updated from the same effective date (eg. Conditions, Required Contact Time, etc), update these details prior to saving the record.

Refer to the relevant process instructions on the ‘Updating Program Placement Configuration’ process page if required.

A Once all required updates to the Program Placement configuration have been completed, select the Save button.

Result:  The updated information will apply to Placements for the selected Program as of the entered effective date.

 

Step 6:    Send notification that the Program Placement information has been updated

Action

Details

Advise the authorised person that the Program Placement information has been updated in Medici.

Send a ‘Reply to All’ response to the email request received in step 1 of this process, and advise that the Program Placement information has been updated using the details supplied in the request.