PS Program Placement Setup: Update Conditions for Program Placements

Update Conditions for Program Placements

Process Overview

Only Placement Administrators have access to enter, update, or correct Program Placement information. If you are not a Placement Administrator, send an email request to your Placement Administrator.

If Conditions for a Program’s Placements need to be updated due to a recent or future change, insert a new effective dated row to update the Program Placement Conditions as at the relevant date.

Note: Updates to the Program Placement configuration will occur on the entered Effective Date. If the Effective Date is a future date, updates to the Program Placement configuration will not apply in Medici until that date (ie. any Conditions added will not apply to Program Placements prior to the Effective Date, and any Condition that is deleted will not be deleted from the Program Placement configuration until the entered Effective Date).

If the Conditions need to be corrected rather than updated (ie. incorrect Conditions were entered when the Program Placement information was configured, or required Conditions were not entered), the Program Placement Conditions should be updated in ‘Correction’ mode.

Step by Step Instructions

Note: The following instructions assume Placement information has previously been configured for the selected Program, and one or more Conditions need to be entered or deleted from the Program Placement configuration. If Placement information for the Program has not been configured, please refer to the process instructions on the ‘Creating Program Placement Configuration’ process page.

Step 1: Receive request to update Placement information for a Program

Step 2: Locate the Program, and record the Effective Date

Question 1: Does a Condition need to be added for the Program Placements?

Step 3: Record the new Condition(s) for the Program Placements

Question 2: Does a Condition need to be deleted from the Program Placements?

Step 4: Delete the Condition(s) from the Program Placements

Step 5: Save the updates to the Program Placement information

Step 6: Send notification that the Program Placement information has been configured

Step 1: Receive request to update Placement information for a Program

Action

Details

Requests to update Placement information for a Program will be received via email from an authorised person (eg. Program Director, Head of School, etc).

The following information is required:

- Program Code

- Date from which the updates to the Placement information will apply to Placements for the selected Program (Effective Date)

- Program Condition(s), including whether the Condition is ‘Compulsory’ or ‘Additional’, and the age of the student’s evidence from the Issue Date to satisfy the Condition (eg. National Police Check, First Aid Certificate, etc)

Step 2: Locate the Program, and record the Effective Date

Application: Medici

Navigation: Student Placements®Placement Setup®Program Placement Setup

update1

Academic Institution: Type or select UniSA (if this value is not already displayed).

Academic Program: Type or select the [relevant Program Code].

Select the Search button (or press Enter).

Result: The Program Placements page is displayed.

update2

Program Placement Details

In the Program Placement Details section, select the Add a New Row button ().

Effective Date: Type or select the [date from which the updated Conditions will apply to Placements for the selected Program].

Question 1: Does a Condition need to be added to the Program Placements?
Question	Yes	No
Does a Condition need to be added for the Program Placements?	Go to step 3.	Go to question 2.
Explanation: If a Condition needs to be added to the Program Placements, the additional Conditions must be recorded (step 3). If a Condition does not need to be added to the Program Placements, the next step is to determine if an existing Condition needs to be deleted (question 2).

Step 3: Record the new Condition(s) for the Program Placements

Application: Medici

Navigation: The Program Placements page will already be displayed as a result of performing step 2

update3

Program Conditions

If there is an existing Program Condition record:

If there is an existing Program Condition, in the Program Conditions section, select the Add a New Row button (). There is no need to insert a new row if there is no existing Condition recorded for the Program Placements.

Populate the new row in the Program Conditions section as follows:

Condition: Type or select the [relevant Program Condition].

Condition Type: Select the appropriate value as follows:

- Compulsory (the Condition must be satisfied for the student to be eligible for Placement).

- Additional (students are encouraged to satisfy the Condition, however the University is unable to enforce the Condition).

Currency: Select the [maximum age of the student’s evidence to satisfy the Condition] (if applicable).

Note: If the required Condition configuration values do not exist in Medici or are out of date, email your Placement Administrator to request the Condition value(s) be created or updated (if you are a Placement Administrator, create/update the Condition value). Once the required configuration has occurred, follow the instructions in this step to record the Condition for the Program Placements.

Continue to repeat this step until all required Program Conditions have been recorded.

Question 2: Does a Condition need to be deleted from the Program Placements?
Question	Yes	No
Does a Condition need to be deleted from the Program Placements?	Go to step 4.	Go to step 5.
Explanation: If a Condition needs to be deleted from the Program Placements, delete the Condition(s) that is no longer applicable (step 4). If a Condition does not need to be deleted from the Program Placements, the next step is to perform any other required changes to the Program Placement information for the same effective date, and then save the record (step 5).

Step 4: Delete the Condition(s) from the Program Placements

Application: Medici

Navigation: The Program Placements page will already be displayed as a result of performing step 2

update4

Program Conditions

If there is more than one Program Condition record, select the View All link to display all Program Conditions.

In the Program Conditions section, select the Delete Row button () adjacent to the Condition record to be deleted.

Result: A message is displayed requesting confirmation the selected row is to be deleted, and advises the deletion will occur when the transaction is saved.

update5

Select the OK button (or press Enter).

Result: The selected Condition is deleted.

Continue to repeat this step until all Conditions that are no longer required have been deleted.

Step 5: Save the updates to the Program Placement information

Application: Medici

Navigation: The Program Placements page will already be displayed as a result of performing step 3 or 4

update6

If further Program Placement details need to be updated from the same effective date (eg. Required Contact Time, Claimable Time, etc), update these details prior to saving the record.

Refer to the relevant process instructions on the ‘Updating Program Placement Configuration’ process page if required.

Once all required updates to the Program Placement configuration have been completed, select the Save button.

Result: The updated information will apply to Placements for the selected Program as of the entered effective date.

Step 6: Send notification that the Program Placement information has been updated
Action	Details
Advise the authorised person that the Program Placement information has been updated in Medici.	Send a ‘Reply to All’ response to the email request received in step 1 of this process, and advise that the Program Placement information has been updated using the details supplied in the request.